2h
Posts: 147
Registered: 19-11-2003
Location: Frederikssund, Denmark
Member Is Offline
Mood: Just looking for a fat lady...
|
 posted on 8-8-2005 at 05:34
|
|
|
Front wheels
2.6 Front Wheels:
--snip--. The maximum difference between the inner –and outer diameter of the Tire is 3.0 mm. The minimum Tire diameter applies on the biggest
measured diameter.
Tire Width: Minimum 8.0 mm
Eh, what does this mean? That you can grind the front tires, so that you have Ø 24mm at the outside and Ø21mm at the inside. That the angle can be
cut on the entire width of the tire??
Best regards
Henrik
|
|
|
|
50 plus
Posts: 63
Registered: 10-11-2002
Location: Almere-Haven
Member Is Offline
Mood: kijk uit naar de volgende wedstr
|
 posted on 8-8-2005 at 08:39
|
|
|
Front wheels
Hello Henrik,
It must be 0.3 mm.
best regards,
Peter
|
|
|
|
|
Gert
Posts: 400
Registered: 31-8-2003
Location: Belgium
Member Is Offline
|
|
posted on 8-8-2005 at 20:18
|
|
|
Frontwheels !!!!!!!!!
Sorry Peter
I found this in Rules and regulation
2.6 Front Wheels:
Rim: make, brand and specification free.
Rubber, type and brand are free, with the exception of silicon tires. Front Tires may be coated.
Tire Diameter: Minimum Ø 24.0 mm. The maximum difference between the inner –and outer diameter of the Tire is 3.0 mm. The minimum Tire diameter
applies on the biggest measured diameter.
Tire Width: Minimum 8.0 mm
So that means according to the rules the different between inner and outher is 3.0 mm
Greetz Gert
|
|
|
|
|
