Gents,

since today I am driving Schoeler Chassis. Now I like to start with my first SLP Chassis. Which is the correct Motorholder for FOX and/or Parma Motor. I got different Information about it.

Martin B. told me , that there is no official Motorholder for this kind of Motor and that there is only one Guy who make this by his own.

Other told me that I can use the Motorholder from the S24.

Can you pls. clarify?

thx

Jens

Hello.

Quick Answer.

If you are Talking about the Plafit FOX (also Fox II, Cheetah, etc.) you have one in the package, also for Bison for Parma you have to mofify the Holder because for this kind of Motor Plafit don´t have a Holder.

Best Regards

Oscar

Hi Oscar,

I checked my two Plafit SLP but there is no FOX Holder. I found only one in my older Super24.

Jens

Hello guys...just abit of background info on why there's no fox/Parma motormount supplied with the SLP chasis


The SLP chassis was developed on request of the organisers of the German Slot Langstrekken Pokal (langstrekken= endurance) This series only uses the Plafit Bison motor so no need for any other motor mounts.

It was a suprise to both Plafit and the SLP organisers that once released "everybody" wanted to have an SLP chassis.


The fox/parma motormount is only supplied with the S124 chassis kit.
You can order it seperately from any Plafit supplier.

As an addition to Tamar's post - you can use the Momo Fox motorholder if you want the ProSlot to drop into the motorwell of the SLP chassis.

Little information from my side....


the fox motor holder supplied from plafit will not lower the motor! you'll have to use either the momo holder or the one ralph an i used at the imca worlds 2007. it comes from a guy called "felgendreher", i think his real name is jürgen stüdemann. this guy will race in martin bartelmes' slp team this season, so i think i won't be a problem to find that motor holder in martin's web shop quite soon. but btw it can also be found in matthias' werkshop, see link below:


Fox (Proslot) Motorholder

hope this could help

Mike

OH OH....Tamar ist Right...i was confuse with the Plafit S24

sorry

Actually there is also this solution. A german guy made it(not Jürgen Stüdeman). The good thing about this one is that you have the "gegenhalter",- the only foxholder for the Slp i have seen so far with that.
http://picasaweb.google.dk/jakobhorsboelandersen/Skrivebord/photo?authkey=-rczHipLbfE#5166169950348664514

Hey Ole,

good stuff, where can I get that motorholder. the "gegenhalter" is a good thing.

cheers,
mike

He is from scr - ostfriesland - write to me and i will give you his name and email.

oleandersen@esenet.dk

regards Ole