Cars & Models
 
Cars & ModelsLMS-forum
  Audi R8 LMS Evo|Ultra
Index
All models
All manufactures
Liveries
2009: #07 Sportsline
2009: #80 S-line
2009: #98 Bilstein
2010: #02 Abt EMC2
2010: #49 Hankook
2010: #58 Schoolmaster
2010: #73 Total
2011: #07 Flatex
2011: #16 E-post
2011: #32 Where Are You?
2012: #07 Dragon
2012: #1a Kangaroo
2012: #2a Red Back Spider
2012: #51 APR
2012: #66 Edge
2013: #13 Rum Bum
32767 view(s)
Ahead of the 2009 season, Audi Sport diversified its operation by establishing a customer motor sport program. Up until that point the competition arm of the German manufacturer had exclusively built prototype racers and touring cars for works or works-supported teams. The first product of the program was a GT3 version of the R8 road car.

Dubbed the R8 LMS, Audi's first GT3 racer shared many of the same underpinnings with the production machine but necessary changes had to be carried through to comply with the regulations and to meet safety requirements. The most fundamental of these was abandoning the road car's all-wheel drive in favour of rear-wheel drive as specified by the regulations.

Anticipating the addition of a V10-powered version to the R8 road car line-up in 2009, the GT3 machine was already equipped with the ten cylinder engine also found in the Lamborghini Gallardo. Displacing just over 5.2 litre, the all-aluminium unit produced over 500 bhp. This was fed to the rear wheels through the standard six-speed gearbox, modified to be operated by paddles behind the steering wheel.

What was carried over almost unaltered was the aluminium spaceframe chassis. Suspension was by double wishbones with coil springs and hydraulic dampers. Optional on the road car, the GT3 racer was equipped with ventilated ceramic discs. Sophisticated driver aides like a race-specific ABS and a minutely adjustable traction control system were also fitted.

While closely resembling the road going R8, the R8 LMS is clothed in a bespoke bodywork. As on the road car, the panels were constructed from a mix of aluminium and carbon fibre. What set the competition body apart are the larger intakes, front splitter and much deeper sills. The finishing touch is a large rear wing, which had a virtual identical profile as the one used on the Le Mans winning R10 TDI.

Article by Wouter Melissen, last updated on November 21, 2011


Technical data Audi R8 LMS ultra (2012): Length 4670 mm | Width 1994 mm | Height 1195 mm
Models for Audi R8 LMS Evo|Ultra
Manufacturer Model Scale Dimensions (LxWxH) Wheelbase Front spur Rear spur
Scaleauto SC-7044 RTR Whitekit 1/24 187.0x83.0x47.0 110.0 82.5 82.5
Scaleauto SC-7043 #98 Phoenix 1/24 187.0x83.0x47.0 110.0 82.5 82.5
Scaleauto SC-7045 #80 Phoenix 1/24 187.0x83.0x47.0 110.0 82.5 82.5

#98 Bilstein Phoenix (D) 2009
Participated in:

Event: Nürburgring 24hrs, Date: 24.05.2009
Track: Nordschleife (D), 25.378 km Distance: 24hrs
Audi R8 LMS #AS42A0FGT310 0275 - Class:SP9
Closed bodywork
Mid-engined, Motor:Audi V10/90° 4v DOHC 5200 cc

Driven by: Hans Stuck (D), Frank Biela (D), Emmanuel Pirro (I), Marcel Fässler (CH)
Result:7th
Grid: 5th
Sponsors: Bilstein, Rowe, Shell
Colours: Yellow, Blue
Tyres: Michelin


Decalset for this livery avaible from decaldoc.de
Go To Top